How To Use Nail Cutter At Home: Valuable Tips

A nail shaper is an electronic document specialists utilize for expert and home nail treatments and pedicures. The shaper can be utilized for both regular and counterfeit nails. The instrument incorporates a progression of turning and exchangeable tips to perform various tasks, for example, eliminating gel cleaning, documenting, molding, and cleaning nails.

Albeit speedy and productive, you should know how to utilize it well, beginning with picking tips. This article tells the best way to utilize the nail shaper accurately, the qualities of the different tips, and what they are utilized for. We generally prescribe going to experts for this sort of treatment.

Features Of The Nail Cutter

Before delving into the subtleties of how to utilize it, we should find out how a nail shaper can carry out various roles as an option in contrast to the more exemplary manual document. The utilization of this grill is, without a doubt, legitimate. However, it is much faster for any final details after doing the mass with the electric record. Minuscule, here’s a clue: the nail shaper is an expert electric record incorporating an engine and handpiece to complete different tasks.

The nail shaper should have a few qualities: work with the tips that play out a few cycles each moment equivalent to 25,000/30,000 to eliminate the gel or acrylic nail clean and not harm the nail. The tips can work with various OK, medium, and coarse grain records, contingent upon the goal and the outcome you need to get. Before seeing the various qualities of the tips, we should find out what the shaper is for.

Using The Cutter

The nail cutter is used for various operations: removing cuticles, hangnails, corns, and calluses, gel or acrylic, acrylic, semi-permanent nail polish, and nail reconstruction. In detail, the cutter allows you to:

1. Quickly removes gel and acrylic nail polish
2. file your nails quickly
3. control the regrowth of the refill shapes the nail, reducing excessive curvature
4. carry out the finishing details
5. reach difficult corners 
6. create complex nail shapes (curvy, square, stiletto nails, or ballerina nails ).
7. in addition to cuticles, remove corns and calluses
8. Treat ingrown toenails.

There are specific router bits for all these operations.

The Bits For The Cutter

Bits are fundamental accessories of cutter micromotors. They are used to remove hangnails and calluses and prepare the nails before applying nail polish, remove UV gels and colors, refine the application of the products in detail, and smooth and shape the nails. There are different types of tips, which differ in two main categories: 

1. removal tips
2. cuticle tips

And afterward by shape, material, and grain/level of abrasiveness. Picking the right one is fundamental to accomplishing the ideal outcome, and try not to harm your nails. Concerning the material, you can pick between earthenware (white, pink, dark), tungsten carbide, precious stone (treated steel with jewel covering), silicone, and rose quartz. You made counterfeit or copper fibers to clean the shaper and eliminate dust and trash from the nails.

The ceramic and tungsten carbide tips are reasonable for eliminating the item; the jewel ones are for nail trims or dry nail treatments (dry nail trims for cleaning the fingernail skin). Each tip has an alternate shape and grain used to carry out its role. The shapes can be circular, fire molded, chime formed, chamber formed (lengthened), or cone-shaped, contingent upon the utilization to be made of it (lifting fingernail skin, eliminating gel, or completing errors). The utilization of the tips can be summed up as indicated by a basic plan:

1. cone-shaped or round and hollow shape to eliminate the item, 
2. flimsy or directed shape toward characterize subtleties, spotless or slight

The level of abrasiveness (fine/superfine, medium, and coarse grain), shown by a shaded circle on the tip shaft – white, yellow, red, blue, green, dark – addresses the tip’s more prominent or lesser forcefulness. Accordingly, in light of the abrasiveness of the grain, the tip will be forceful.

A severe level of abrasiveness eliminates manufacturer gel or Acrygel; medium and low abrasiveness degrees are utilized to set up the nail or to refine its subtleties. The coarser/grating tip (dark, green, blue) eliminates more earnest and thicker acrylic, gel, and poly gel; the medium grain (red, yellow) eliminates the semi-super durable.

How To Use The Nail Cutter

First of all, it is good to make sure of some fundamental aspects :

1. That the tip is correctly fixed to the cutter
2. Adjust the speed of the cutter according to its function (for example, to remove gel or acrylic, a higher speed is recommended)
3. Keep the cutter in the correct position relative to the nail.
4. Maneuver the cutter correctly, slowly, and steadily, avoiding remaining at the same point for too long so as not to overheat the nail.
5. Clean the nail and cutter after each use.

After each use, it is important to carefully clean the nail cutter and disinfect the tools to prevent the formation of bacteria and fungi. As mentioned, the use of the nail cutter is divided into two categories :

1. remove and treat cuticles and hangnails / dry manicure to prepare natural nails and clean the cuticle area
2. Remove gel, Acrigel, or acrylic, semi-permanent nail polish to refill or model a shape during reconstruction.

Cuticle And Cuticle Removal

Removing cuticles and hangnails to clean the cuticle and lateral valleys is an operation that gives a more well-groomed appearance to the nails and guarantees better application and yield of the products. You can use only the cutter, scissors, and cuticle nippers to carry out this operation. The tips recommended for this treatment are low abrasive and more delicate on the natural nail; therefore, diamond tips are made of titanium or carbon alloy with an elongated or rounded shape.  The tips for smoothing thickenings are diamond ones made of carbide or pumice stone, perfect for lifting cuticles from the nail bed and smoothing any thickenings.

Gel And Semi-Permanent Removal

To remove acrylic and AcryGel, you need tools with a higher degree of abrasiveness, medium-high abrasive tips with a flame or cone shape—precisely, a tungsten carbide tip. You can use a cone-shaped tip with a medium degree of abrasiveness to remove semi-permanent. For finishing, however, tips with a thin shape are more suitable.

To remove the old gel, after having mounted the appropriate cylinder tip, you must activate it and make it perform movements parallel to the direction of the nail, with the cylinder rotating in the opposite direction at a low speed. In addition to removing the old gel, the length of the nail can be adjusted with the cutter.

1. Don’t linger on the same point, going beyond the two steps, because the cylinder will overheat, causing discomfort
2. The movement must be light but constant, not abrasive,
3. Focus on the edges of the nail

Always leave a gel layer underneath to avoid touching the natural nail with the cutter.

Read Also: False Nails With Glue: How To Put Them On?